200-301 ccna 2022-2023

CCNA 200-301 dumps contain 1017 exam questions and answers covering actual CCNA 200-301 certification exams and labs to prepare for the 2022-2023 CCNA certification.

It is very important to choose the most trustworthy CCNA 200-301 certification materials. Lead4Pass has been an IT certification provider that really solves problems for candidates since 2004,
Use the CCNA 200-301 dumps provided by Lead4Pass: https://www.leads4pass.com/200-301.html, to prepare for the 2022-2023 CCNA certification exam.

Try a free CCNA 200-301 exam questions and answers online (Include Labs):

Question 1:

Refer to the exhibit. An engineer is configuring an EtherChannel using LACP between Switches 1 and 2. Which configuration must be applied so that only Switch 1 sends LACP initiation packets?

ccna 200-301 questions 1

A. Switch 1 (config-if)#channel-group 1 mode on Swrtch2(config-if)#channel-group 1 mode passive

B. Switch1(config-if)#channel-group 1 mode passive Switch2(config-if)#channel-group 1 mode active

C. Switch1{config-if)#channel-group 1 mode active Switch2(config-if)#channel-group 1 mode passive

D. Switch1(config-if)#channel-group 1 mode on Switch2(config-if)#channel-group 1 mode active

Correct Answer: C

Question 2:

A wireless administrator has configured a WLAN; however, the clients need access to a less congested 5-GHz network for their voice quality. What action must be taken to meet the requirement?

A. enable AAA override

B. enable RX-SOP

C. enable DTIM

D. enable Band Select

Correct Answer: D

Question 3:

DRAG DROP Drag and drop the TCP/IP protocols from the left onto the transmission protocols on the right

Select and Place:

ccna 200-301 questions 3

Correct Answer:

ccna 200-301 questions 3-1

Question 4:

An engineer is configuring SSH version 2 exclusively on the R1 router. What is the minimum configuration required to permit remote management using the cryptographic protocol?

A. hostname R1 IP domain name cisco crypto key generate RSA general-keys modulus 1024

username cisco privilege 15 password 0 cisco123

IP ssh version 2

line vty 0 15

transport input ssh

login local

B. hostname R1 crypto key generate RSA general-keys modulus 1024 username cisco privilege 15 password 0 cisco123 IP ssh version 2 line vty 0 15 transport input all login local

C. hostname R1 service password-encryption crypto key generate RSA general-keys modulus 1024 username cisco privilege 15 password O cisco123 IP ssh version 2 line vty 0 15 transport input ssh login local

D. hostname R1 IP domain name cisco crypto key generate RSA general-keys modulus 1024 username cisco privilege 15 password 0 cisco123 IP ssh version 2 line vty 0 15 transport input all login local

Correct Answer: C

Question 5:

Drag and drop each broadcast IP address on the left to the Broadcast Address column on the right. Not all options are used.

Select and Place:

ccna 200-301 questions 5

Correct Answer:

ccna 200-301 questions 5-1

Question 6:

Which mode must be set for APs to communicate to a Wireless LAN Controller using the Control and Provisioning of Wireless Access Points (CAPWAP) protocol?

A. bridge

B. route

C. autonomous

D. lightweight

Correct Answer: D

Question 7:

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

A. The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table.

B. The Layer 2 switch sends a copy of a packet to the CPU for destination MAC address learning.

C. The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN.

D. The Layer 2 switch drops the received frame.

Correct Answer: C

If the destination MAC address is not in the CAM table (unknown destination MAC address), the switch sends the frame out to all other ports that are in the same VLAN as the received frame. This is called flooding. It does not flood the frame out of the same port on which the frame was received.

Question 8:

Refer to the exhibit. Which command would you use to configure a static route on Router1 to network 192.168.202.0/24 with a nondefault administrative distance?

ccna 200-301 questions 8

A. router1(config)#ip route 192.168.202.0 255.255.255.0 192.168.201.2 1

B. router1(config)#ip route 192.168.202.0 255.255.255.0 192.168.201.2 5

C. router1(config)#ip route 1 192.168.201.1 255.255.255.0 192.168.201.2

D. router1(config)#ip route 5 192.168.202.0 255.255.255.0 192.168.201.2

Correct Answer: B

The default AD of the static route is 1 so we need to configure another number for the static route.

Question 9:

What is the primary function of a Layer 3 device?

A. to analyze traffic and drop unauthorized traffic from the Internet

B. to transmit wireless traffic between hosts

C. to pass traffic between different networks

D. forward traffic within the same broadcast domain

Correct Answer: C

Question 10:

A network administrator must enable DHCP services between two sites. What must be configured for the router to pass DHCPDISCOVER messages onto the server?

A. a DHCP Relay Agent

B. DHCP Binding

C. a DHCP Pool

D. DHCP Snooping

Correct Answer: A

Question 11:

Which QoS queuing method discards or marks packets that exceed the desired bit rate of traffic flow?

A. shaping

B. policing

C. CBWFQ

D. LLQ

Correct Answer: B

Question 12:

Refer to the exhibit.

ccna 200-301 questions 12

A network engineer is in the process of establishing IP connectivity between two sites. Routers R1 and R2 are partially configured with IP addressing. Both routers have the ability to access devices on their respective LANs. Which command set configures the IP connectivity between devices located on both LANs in each site?

ccna 200-301 questions 12-1

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: D

Question 13:

Refer to the exhibit. An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0/1. Which access list must be applied?

ccna 200-301 questions 13

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A

Question 14:

What are network endpoints?

A. act as routers to connect a user to the service prowler network

B. a threat to the network if they are compromised

C. support inter-VLAN connectivity

D. enforce policies for campus-wide traffic going to the internet

Correct Answer: B

Question 15:

What are two reasons that cause late collisions to increment on an Ethernet interface? (Choose two.)

A. when Carrier Sense Multiple Access/Collision Detection is used

B. when one side of the connection is configured for half-duplex

C. when the sending device waits 15 seconds before sending the frame again

D. when a collision occurs after the 32nd byte of a frame has been transmitted

E. when the cable length limits are exceeded

Correct Answer: BE

A late collision is defined as any collision that occurs after the first 512 bits (or 64th bytes) of the frame have been transmitted. The usual possible causes are full-duplex/half-duplex mismatch, exceeded Ethernet cable length limits, or defective

hardware such as incorrect cabling, a non-compliant number of hubs in the network, or a bad NIC.

Late collisions should never occur in a properly designed Ethernet network. They usually occur when Ethernet cables are too long or when there are too many repeaters in the network.

Reference: https://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html

Total Questions: 1017 Q&A (Include Newest Simulation Labs)


Lead4Pass provides protection for candidates who are about to embark on the path of CCNA certification, using CCNA 200-301 dumps: https://www.leads4pass.com/200-301.html (Include Newest Simulation Labs), becoming 2022-2023 One of CCNA members, Help you get rid of current problems and enhance career value.

Cisco 200-301 exam ready here! Get the latest 200-301 exam exercise questions and exam dump pdf for free! 100% pass the exam to select
the full Cisco 200-301 dumps: https://www.leads4pass.com/200-301.html the link to get VCE or PDF. All exam questions are updated!

Lead4pass offers the latest Cisco 200-301 Google Drive

[Latest updates] Free Cisco 200-301 dumps pdf download from Google Drive: https://drive.google.com/file/d/1FXyIHQQjzFmqcZS741tYexuT3qAVU_Gt/

Examsdemo Exam Table of Contents:

latest updated Cisco 200-301 exam questions and answers

QUESTION 1lead4pass 200-301 exam questions q1

Refer to the exhibit. With which metric was the route to host 172.16.0.202 learned?
A. 0
B. 110
C. 38443
D. 3184439
Correct Answer: C

QUESTION 2
Drag and drop the network protocols from the left onto the correct transport services on the right.
Select and Place:lead4pass 200-301 exam questions q2

QUESTION 3
Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with
IP address 10.20.20.1/24?lead4pass 200-301 exam questions q3

A. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
B. R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
C. R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0
Correct Answer: B

QUESTION 4
DRAG DROP
Drag and drop the characteristics of networking from the left onto the correct networking types on the right.
Select and Place:lead4pass 200-301 exam questions q4

Correct Answer:

lead4pass 200-301 exam questions q4-1

QUESTION 5
Refer to the exhibit. If the network environment is operating normally, which type of device must be connected to
interface FastEthernet 0/1?lead4pass 200-301 exam questions q5

A. DHCP client
B. access point
C. router
D. PC
Correct Answer: D

QUESTION 6
Refer to the exhibitlead4pass 200-301 exam questions q6

A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers
must be able to access the web server.

lead4pass 200-301 exam questions q6-1

Which configuration when applied to switch A accomplishes this task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B

QUESTION 7
How can the Cisco Discovery Protocol be used?
A. to allow a switch to discover the devices that are connected to its ports
B. to determine the hardware platform of the device
C. to determine the IP addresses of connected Cisco devices
D. all of the above
Correct Answer: D

QUESTION 8
Which IPv6 address block sends packets to a group address rather than a single address?
A. 2000::/3
B. FC00::/7
C. FE80::/10
D. FF00::/8
Correct Answer: D

QUESTION 9
Refer to the exhibit.lead4pass 200-301 exam questions q9

An extended ACL has been configured and applied to router R2. The configuration failed to work as intended.
Which two changes stop outbound traffic on TCP ports 25 and 80 to 10.0.20.0/26 from the 10.0.10.0/26 subnet while
still allowing all other traffic? (Choose two.)
A. Add a “permit ip any any” statement at the end of ACL 101 for allowed traffic.
B. Add a “permit ip any any” statement to the beginning of ACL 101 for allowed traffic.
C. The ACL must be moved to the Gi0/1 interface outbound on R2.
D. The source and destination IPs must be swapped in ACL 101.
E. The ACL must be configured the Gi0/2 interface inbound on R1.
Correct Answer: BD

QUESTION 10
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received interface counter increments?
A. collision
B. CRC
C. runt
D. late collision
Correct Answer: D

QUESTION 11
What is the difference regarding reliability and communication type between TCP and UDP?
A. TCP is reliable and is a connectionless protocol; UDP is not reliable and is a connection-oriented protocol.
B. TCP is not reliable and is a connectionless protocol; UDP is reliable and is a connection-oriented protocol.
C. TCP is not reliable and is a connection-oriented protocol; UDP is reliable and is a connectionless protocol.
D. TCP is reliable and is a connection-oriented protocol; UDP is not reliable and is a connectionless protocol.
Correct Answer: D

QUESTION 12
Which network allows devices to communicate without the need to access the Internet?
A. 172.9.0.0/16
B. 172.28.0.0/16
C. 192.0.0.0/8
D. 209.165.201.0/24
Correct Answer: B

QUESTION 13
While examining excessive traffic on the network, it is noted that all incoming packets on an interface appear to be
allowed even though an IPv4 ACL is applied to the interface. Which two misconfigurations cause this behavior?
(Choose two.)
A. The ACL is empty
B. A matching permit statement is too broadly defined
C. The packets fail to match any permit statement
D. A matching deny statement is too high in the access list
E. A matching permit statement is too high in the access list
Correct Answer: BE

Lead4Pass Cisco discount code

lead4pass coupon

About lead4pass

Lead4Pass has 7 years of exam experience! A number of professional Cisco exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the Cisco exam! Exams are a part of life, but they are important! In the study, you need to sum up the study! Trust Lead4Pass to help you pass the exam 100%!

about lead4pass

Summarize:

Examsdemo free to share Cisco 200-301 exam exercise questions, 200-301 pdf, 200-301 exam video! Lead4pass updates exam questions and answers throughout the year! Make sure you pass the exam successfully. Select lead4Pass 200-301 to pass Cisco 200-301 exam “Cisco Certified Network Associate”.

ps.
Latest update Lead4pass 200-301 exam dumps: https://www.leads4pass.com/200-301.html (385 Q&As)
[Latest updates] Free Cisco 200-301 Dumps pdf download from Google Drive: https://drive.google.com/file/d/1FXyIHQQjzFmqcZS741tYexuT3qAVU_Gt/